AudioCodes Mediant 3000 Bedienungsanleitung PDF herunterladen (Seite 39)

Configuration Note 4. Configuring AudioCodes E-SBC

Connecting Microsoft Lync 2013 to a SIP Trunk 39 June 2013

4.2 Step 2: Enabling the SBC Application

This step shows how to enable the SBC application.

 To enable the SBC application:

1. Open the Applications Enabling page (Configuration tab > VoIP > Applications

Enabling > Applications Enabling).

Figure 4-4: Applications Enabling

2. From the 'SBC Application' drop-down list, select Enable.

3. Reset the E-SBC with a burn to flash for this setting to take effect (see Section 4.16

on page 73).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 79 80

Keine Kommentare

AudioCodes Mediant 3000 Bedienungsanleitung Seite 39