AudioCodes MP-118 Installationshandbuch PDF herunterladen (Seite 21)

Version 6.0 21 March 2010

Installation Manual 2. Installing the Device

¾ To connect MP-11x to a PC:

1. Connect the PS/2 connector (refer to the figure below for connector pinouts) on one

end of the cable to the MP-11x RS-232 port (labeled RS-232).

2. Connect the DB-9 connector at the other end of the cable to either the COM1 or COM2

RS-232 communication port on your PC.

Figure 2-11: PS/2 to DB-9 Adaptor Connector Pinouts

Figure 2-12: PS/2 Connector Pinouts

For information on establishing a serial communications link with MP-11x, refer to

‘Assigning an IP Address Using the CLI’ on page 41.

2.1.4.5 Connecting MP-11x to Power

The MP-11x is powered from a standard AC electrical outlet.

Warnings:

• The device must be connected only by professional service personnel.

• Ensure that the device connects to an electrical socket outlet that

provides protective earthing (grounding). Prior to connecting power, refer

to the Regulatory Information document supplied with the device.

• Use only the AC power cord supplied with the device.

¾ To connect MP-11x to the power supply:

 Connect the MP-11x power socket to a standard electrical outlet using the supplied AC

power cord.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 57 58

Keine Kommentare

AudioCodes MP-118 Installationshandbuch Seite 21