420HD IP Phone with Microsoft Lync
Administrator's Manual 12 Document #: LTRT-09930
Correct configuration of these three is critically important. The other DHCP options shown
in the figure above are also important but are less susceptible to inaccuracies than these.
2.1.1 DHCP Option 43
Option 43 comprises the five sub-options 001-005 shown in the figure above and in the
table below. These point the phone to the location of the Certificate Provisioning service on
the Lync server. Use the table as a reference to make sure that each sub-option is
correctly configured.
Refer also to http://technet.microsoft.com/en-us/library/gg398088(v=ocs.14).aspx
Table 2-1: DHCP Option 43 Configuration Reference
/CertProv/CertProvisioningService.svc
2.1.2 DHCP Option 120
Option 120, which includes the Lync Server’s fully qualified domain name (FQDN) as
shown in the table below, is required for the certification authority (CA) pool Registrar.
Use the table as reference to make sure Option 120 is correctly configured.
Table 2-2: DHCP Option 120 Configuration Reference
2.1.3 DHCP Option 42
Option 42 specifies the servers that provide NTP /SNTP for the network. Make sure that
NTP server IP addresses are correct, as shown in the table below.
Table 2-3: DHCP Option 120 Configuration Reference
Kommentare zu diesen Handbüchern