AudioCodes 420HD Bedienungsanleitung PDF herunterladen (Seite 14)

420HD IP Phone with Microsoft Lync

User's Manual 14 Document #: LTRT-11891

2.3 Cabling

This section shows how to cable your phone.

Figure 2-3: Cabling

Action

Description

Connect the short, straight end of the cord to the handset.

Connect the longer, straight end to the jack (RJ-9 port, for the handset) on the phone.

Connect the RJ-45 LAN port to your LAN network (LAN port or LAN switch/router), using a

CAT 5 / 5e Ethernet cable

Connect the RJ-45 PC port to a computer, using a CAT 5 / 5e straight-through Ethernet

cable

Connect the connector tip of the AC power adapter to the phone’s power socket (labeled DC

12V). Connect the two-prong AC adapter directly to the electrical wall outlet. When the

phone powers up, all the LEDs momentarily light up

Connect the RJ-9 headset jack to a headset (optional)

Note: If the LAN to which the phone is connected supports Power over Ethernet (PoE), no

AC adapter is required; the phone receives power from the Ethernet network.

Prior to connecting power, refer to the Compliancy and Regulatory Information at

www.audiocodes.com/library.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

Keine Kommentare

AudioCodes 420HD Bedienungsanleitung Seite 14