AudioCodes Mediant 1000 Bedienungsanleitung PDF herunterladen

5.6 - AudioCodes Mediant 1000 SIP Digital Gateway

1 Important Notes

• Check the SIP 3

Party Validation Website for current validation status. The

SIP 3

Part Validation Website can be viewed at:

http://testlab.inin.com or http://testlab.vonexus.com

• It is recommended to make basic changes to the I3 supplied .ini file then

utilize the web interface for further configuration.

• As this unit is a critical piece of the SIP infrastructure, it is highly

recommended that DHCP not be used. A static IP address is the preferred

method and is how the unit was configured during validation.

• After a factory reset, the Mediant 1000 will default to G.729 as its primary

codec

• Dial plan entries will supersede all proxy settings.

• The option for clock master is not exposed in the web interface. The settings

in the I3 supplied .ini file are to derive clock from the PSTN connection.

Should the internal oscillator be required, refer to INI Parameters Section of

this document, specifically the TDMBusClockSource, ClockMaster and

ClockMaster_x parameters.

• When using SRTP the number of available channels decreases by ~25%.

• Previous Issue resolved - With putback transfer: AudioCodes case # 13540.

•

Previous Issue resolved - FXO issue with TLS: AudioCodes case# 14031

2 Vendor Documentation

Documentation can be found on the CD shipped with the Mediant 1000.

3 Validated Firmware Version

5.60A.031.002

4 Install

Download the Mediant 1000 files from the 3

Party Validation website:

http://www.testlab.inin.com or http://www.testlab.vonexus.com

This document applies to one or more Interactive Intelligence and/or Vonexus

products.

Vonexus is a wholly owned subsidiary of Interactive

Intelligence.

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - 5.60A.031.002

5.6 - AudioCodes Mediant 1000 SIP Digital Gateway 1 Important Notes • Check the SIP 3rd Party Validation Website for current validation status

Seite 2 - 5 Configuration

Contained in the zip file will be the validated version of firmware (.cmp), as well as any supplemental configuration files, and a sample .ini file.

Seite 3

Figure 1 Figure 2 Changing the Configuration: • Prior to making any changes, the Audiocodes documentation should be consulted for informatio

Seite 4

3 (erase digits and relay using RFC2833) Example: DTMFTransportType = 3 RFC2833PayloadType Payload number to use for RFC2833 packets. This value is

Seite 5

6 Redundant Proxy Configuration The following configuration options are found under Protocol Management/Protocol Definition/Proxy & Registration

Seite 6 - 8 Security

7 Putback Transfer Select the Call Putback checkbox for the SIP line to enable the ability for the IC system to receive a call from the PSTN or a P

Weitere Dokumente für Gateways / Controller AudioCodes Mediant 1000

Um das Dokument anzuzeigen AudioCodes Mediant 1000 Bedienungsanleitung

AudioCodes Mediant 1000 Bedienungsanleitung (46 Seiten)

Um das Dokument anzuzeigen AudioCodes Mediant 1000 Installationshandbuch

AudioCodes Mediant 1000 Installationshandbuch (76 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

AudioCodes Mediant 1000 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Gateways / Controller AudioCodes Mediant 1000 herunter. AudioCodes Mediant 1000 SIP Digital Gateway 1 Important Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Gateways / Controller AudioCodes Mediant 1000

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gateways / Controller AudioCodes Mediant 1000