AudioCodes Mediant 600 Installationshandbuch PDF herunterladen (Seite 49)

Version 6.0 49 February 2010

Installation Manual 4. Monitoring the Device

4 Monitoring the Device

The operating status of the device can be monitored in the following ways:

 Monitoring the device's hardware front-panel LEDs (refer to 'Front-Panel LEDs' on

page 49).

 Monitoring the device using the Web interface (refer to 'Web Interface' on page 50).

4.1 Front-Panel LEDs

The location of the device's front panel LEDs are shown in the figure below and described

in the subsequent table.

Figure 4-1: Location of LEDs on I/O Modules

Table 4-1: Analog I/O (FXS / FXO) Modules LEDs Description

I/O Port LED Color State Description

RJ-11

Green On

 FXS: phone is off-hooked.

 FXO: off-hooks the line toward the PBX.

Blinking

 FXS: rings the extension line.

 FXO: detects a ring signal from the PBX.

Red On Error (malfunction in line).

Table 4-2: E1/T1 PRI I/O TRUNKS Modules LED Description

LED Color State Description

RJ-48c

Green On Trunk is synchronized (normal operation).

Red On Loss due to any of the following signals:

 LOS - Loss of Signal

 LOF - Loss of Frame

 AIS - Alarm Indication Signal (the Blue Alarm)

 RAI - Remote Alarm Indication (the Yellow Alarm)

- Off Failure / disruption in the AC power supply or the power is

currently not being supplied to the device through the AC

power supply entry.

1 2 ... 44 45 46 47 48 49 50 51 52

Keine Kommentare

AudioCodes Mediant 600 Installationshandbuch Seite 49