AudioCodes 310HD Spezifikationen PDF herunterladen (Seite 71)

Administrator's Manual 6. Configuration File Parameters

Version 1.0.2 71 October 2009

6 Configuration File Parameters

This appendix describes the parameters that you can set in the Configuration file for the IP

phone. The configuration file is in the format <phone’s MAC address>.cfg. This Configuration

file can be loaded to the phone using TFTP or manually from your local PC (refer to Section 4.8.1

on pag

e 58).

The Configuration file can be created using a standard ASCII, text-based program such as

Notepad. The syntax of the configuration file is as follows:

There cannot be spaces on either side of the equals (=) sign. Every parameter must be on a new

line.

The Configuration file example below shows part of a Configuration file:

[HW_TYPE]

TYPE=310HD

[AUTO_VERSION]

VERSION=20090705

[SIP]

voip/line/0/enabled=1

voip/line/0/id=1234

voip/line/0/description=310HD

voip/line/0/auth_name=1234

voip/line/0/auth_password=4321

Note: When updating the configuration file the “VERSION” parameter must be

incremented. The suggested method for doing this is to use the following syntax:

YYYYMMDD (e.g. 20001201).

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 93 94

Keine Kommentare

AudioCodes 310HD Spezifikationen Seite 71