AudioCodes 310HD Spezifikationen Seite 85

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 94
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 84
Administrator's Manual 6. Configuration File Parameters
Version 1.0.2 85 October 2009
6.5 Debugging (Syslog)
Table 6-11: Debugging Configuration File Parameters
Parameter Description
Syslog Server
voip/log_level
Not supported.
voip/syslog/syslog_serv
er_addr
The IP address (in dotted-decimal notation) of the computer you are using to
run the Syslog server. The Syslog server is an application designed to collect
the logs and error messages generated by the phone. The default IP address
is 0.0.0.0.
voip/syslog/syslog_serv
er_port
Defines the UDP port of the Syslog server.
The valid range is 0 to 65,535. The default port is 514.
voip/syslog/syslog_udp_
terminal_flag
Defines the output direction of the Syslog information.
0 = Disable (Default)
1 = Toward the network
2 = Toward the terminal (Not relevant for user configuration)
3 = Towards the network and terminal (Not relevant for user configuration)
Packet Recording
voip/packet_recording/e
nabled
Activates the packet recording mechanism.
voip/packet_recording/re
mote_ip
The IP address (in dotted-decimal notation) of the remote computer to which
the recorded packets are sent. The recorded packets should be captured by a
network sniffer (such as Wireshark). The default IP address is 0.0.0.0.
voip/packet_recording/re
mote_port
Defines the UDP port of the remote computer to which the recorded packets
are sent.
The valid range is 0 to 65,535. The default port is 50000.
voip/rtp_recording/enabl
ed
Activates the DSP RTP recording.
voip/ec_debug_recordin
g/enabled
Activates the Echo Canceller Debug recording.
voip/network_recording/
enabled
Activates the DSP network (TDM Out) recording.
voip/tdm_recording/ena
bled
Activates the DSP TDM (TDM In) recording.
voip/rv_log_filter
Filters the type of the application logging.
Bitwise field:
001 = SIP Call Control
010 = SIP Stack
100 = User Application
e.g., To enable “SIP Call Control” and “User Application” logs, the value
should be 4 (101).
Seitenansicht 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 93 94

Kommentare zu diesen Handbüchern

Keine Kommentare