AudioCodes MEDIAPACK VERSION 6.2 Bedienungsanleitung PDF herunterladen (Seite 151)

User's Manual 6. Configuring the MediaPack

Version 2.2 151 July 2007

Table 6-28: Load CLI Parameters

Parameter Description

Using CLI

To load the configuration via CLI:

1. Open a CLI session using Telnet or a serial connection.

2. Log on to the system. Default username and password: user=”Admin”; password=”Admin”.

3. Type the enable command to acquire administrative privileges.

4. Change the mode to “configuration”.

5. Use the command copy <source> <target>. For example:

copy tftp://10.33.2.2/MediaPack.cfg startup-config

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 179 180

Keine Kommentare

AudioCodes MEDIAPACK VERSION 6.2 Bedienungsanleitung Seite 151