AudioCodes MEDIAPACK VERSION 6.2 Bedienungsanleitung PDF herunterladen (Seite 49)

User's Manual 4. Initial Configuration

Version 2.2 49 July 2007

d. Enable the new configuration by typing the following command:

192.168.2.1(IF-IP)[WAN]# shutdown <CR>

192.168.2.1(IF-IP)[WAN]# no shutdown <CR>

e. Verify the new WAN IP settings by typing the following command:

192.168.2.1(if-ip)[WAN]# show ip interface WAN <CR>

f. Exit the WAN mode using the following command:

192.168.2.1(if-ip)[WAN]# exit <CR>

g. Continue to Step 6 to configure the default gateway IP address.

6. Configure the default gateway (relevant to Static and PPPoE WAN interface modes),

by typing the following command:

192.168.2.1(cfg)#

192.168.2.1(cfg)#context ip router <CR>

192.168.2.1(ctx-ip)[router]#route 0.0.0.0 0.0.0.0 <Default

Gateway IP> <CR>

In our example setup, the default gateway is defined as 10.33.0.1.

7. Save the configuration by typing the following command:

192.168.2.1 # store-running-config

For additional information on configuring the network settings, refer to Section 'Network

Settings' on page 118.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 179 180

Keine Kommentare

AudioCodes MEDIAPACK VERSION 6.2 Bedienungsanleitung Seite 49