AudioCodes Mediant 3000 Bedienungsanleitung PDF herunterladen (Seite 13)

Microsoft Lync and ThinkTel SIP Trunk 13 June 2012

Microsoft Lync and ThinkTel SIP Trunk 3. Configuring Lync Server 2010

3 Configuring Lync Server 2010

This section shows how to configure the Lync Server 2010 to operate with the E-SBC

device. Follow this procedure:

1. Configure the E-SBC device as a ‘IP/PSTN Gateway’ (see Section 3.1 on pag

e 13)

2. Associate the ‘IP/PSTN Gateway’ with the Mediation Server (see Section 3.2 o

n page

16)

3. Configure a ‘Route’ to utilize the SIP

trunk connected to the E-SBC device (see

Section 3.3 on page 21)

Note: Dial Plans, Voice Policies and PSTN usages are also necessary for

enterprise voice deployment but they're beyond the scope of this

document.

3.1 Configuring the E-SBC device as a ‘IP/PSTN

Gateway’

This section shows how to configure the E-SBC device as an IP/PSTN Gateway.

¾ To configure the E-SBC device as an IP/PSTN Gateway and associate it with the

Mediation Server:

1. On the server where the Topology Builder is located, start the Lync Server 2010

Topology Builder: Click Start, select All Programs and select Lync Server

Topology Builder.

Figure 3-1: Opening the Lync Server Topology Builder

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 62 63

Keine Kommentare

AudioCodes Mediant 3000 Bedienungsanleitung Seite 13