AudioCodes Mediant 3000 Bedienungsanleitung PDF herunterladen (Seite 55)

Microsoft Lync and ThinkTel SIP Trunk 55 June 2012

Microsoft Lync and ThinkTel SIP Trunk 4. Configuring the E-SBC Device

4.13 Step 13: Configuring Miscellaneous Parameters

This step shows how to configure miscellaneous parameters for SBC functionality.

¾ To configure Disconnect Parameters:

1. Open the Advance Parameters page (Configuration tab > VoIP menu > SIP

Definitions > Advance Parameters).

Figure 4-34: Disconnect Parameters Screen

2. From the ‘Disconnect on Broken Connection’ drop-down list, select No (it's mandatory

to set this field in a Lync environment). It determines whether the device releases the

call if RTP packets are not received within a user-defined timeout.

¾ To configure AdminPage parameters:

1. Open the Admin page: Append the case-sensitive suffix ‘AdminPage’ to the device's

IP address in your Web browser's URL field (e.g., http://10.15.45.201/AdminPage).

2. In the left pane click ini Parameters:

Figure 4-35: INI File Output Window

3. Enter these values in the 'Parameter Name' and 'Enter Value' fields:

Parameter Value

SBCFORKINGHANDLINGMODE

Enter 1. Determines if 18x with SDP is received, the device opens a

voice stream according to the received SDP. The device reopens the

stream according to subsequently received 18x responses with SDP,

or plays a Ringback tone if 180 response without SDP is received. It's

mandatory to set this field for the Lync environment.

4. Click Apply New Value for this parameter.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63

Keine Kommentare

AudioCodes Mediant 3000 Bedienungsanleitung Seite 55