AudioCodes MP-102 Bedienungsanleitung PDF herunterladen (Seite 4)

VoiceDirector Device Configuration Guide AudioCodes MP-102/104/108 FXO & MP-102/104/108 FXS

1. AudioCodes MP-102/104/108 FXO

This chapter contains configuration instructions for the AudioCodes MP-

102/104/108 FXO device.

Version ID: 4.40.193.350

IMPORTANT

Contact your VoiceDirector reseller to obtain the

package for AudioCodes MP configuration for

VoiceDirector.

Your device configuration depends upon how you obtain your AudioCodes MP

device.

 If you purchased the AudioCodes MP device through your

VoiceDirector reseller, the device is already configured with

the following:

1. Firmware version 4.40.193.350 or later

2. Configuration file (INI file) for VoiceDirector

3. US call progress tones

4. Coefficient file

NOTE

If you would like to install the call progress tones for a different

region, please refer to the Installing Call Progress Tones section

on page 16.

You will need to follow the following configuration instructions:

1. Setting Additional Configuration Values on page 7.

2. Setting Account Configuration Values on page 8.

 If you already have the AudioCodes MP gateway and would

like to configure it to use with VoiceDirector, follow the

instructions below.

Accessing the Device

There are two ways to get the device’s IP address:

 Via Web browser.

 Via the console.

VIA THE WEB BROWSER

If the DHCP server registers the host name to a DNS server, the user can access

the Gateway through a Web browser, using the URL:

http://acl_<serial_number>.

The serial number is equal to last 6 digits of the MAC address converted from

Hex to decimal. For example, if the device’s MAC address is 00908f

010280,

the DNS name would be acl_66176.

Page 1

1 2 3 4 5 6 7 8 9 ... 19 20

Keine Kommentare

AudioCodes MP-102 Bedienungsanleitung Seite 4