AudioCodes MP-102 Installationsanleitung PDF herunterladen (Seite 37)

Fast Track Installation Guide 7. Upgrading the MP-1xx

Version 4.6 35 July 2005

Figure 7-8: Auxiliary Files Screen

¾ To save the loaded auxiliary files to flash memory, take these 2 steps:

1. Click the Save Configuration button on the main menu bar; the ‘Save Configuration to the

Flash Memory’ screen is displayed.

Note: Saving an auxiliary file to flash memory may disrupt traffic on the MP-1xx. To

avoid this, disable all traffic on the device before saving to flash memory.

2. Click the Save Configuration button in the middle of the screen; a confirmation message

appears when the save is complete.

Note: A device reset is required to activate a loaded CPT file, and may be required

for the activation of certain ini file parameters.

¾ To reset the MP-1xx, take these 2 steps:

1. Click the Reset button on the main menu bar; the ‘Reset’ screen is displayed.

2. Click the Reset button in the middle of the screen; the auxiliary files are saved into flash and

the MP-1xx restarts. This takes approximately 1 minute to complete. When the MP-1xx has

finished restarting, the Ready and LAN LEDs on the front panel are lit green.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

Keine Kommentare

AudioCodes MP-102 Installationsanleitung Seite 37