AudioCodes Mediant 1000 Bedienungsanleitung PDF herunterladen (Seite 26)

SIP SOLUTIONS TRUNKING

Configuration Settings, Notes, & Recommendations

Page 25

March 2012

As shown below, the parameters are set using drop down menus. The G.711 Coder must be set

up as show. The Payload Type value is auto-populated based on the Coder Name selected. For

example, G.711 is a ‘0’ Payload Type. G.729 is an ‘18’ Payload Type. Packetization Time must

be set to the to ‘20’ (milliseconds). Rate is fixed at ‘64’ for G.711U-law. Silence Suppression is

always configured as ‘Disabled.’

Coder Groups may be set up to provide different Coders to different IP Interfaces. Integra

Telecom supports G.711U-law (0) and G.729 (18) only. Typically, these parameters are used

when the customer has multiple SIP routes and accounts on a single MSBG. This is purely

discretionary. Up to four Coder Groups may be configured.

Not modified or used in this configuration.

CODERS AND PROFILES

VOIP

Coder Group Settings

CODERS AND PROFILES

VOIP

Tel Profile Settings

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 45 46

Keine Kommentare

AudioCodes Mediant 1000 Bedienungsanleitung Seite 26