AudioCodes MediaPack MP-124 Bedienungsanleitung PDF herunterladen (Seite 17)

Configuration Note 3. Accessing the Device

Version 6.6 17 September 2013

3.1.1 Assigning IP Address to the Device

This section describes how to assign an IP address to the device.

 To assign an IP address to the device:

1. Select the Index radio button corresponding to the Application Type OAMP + Media +

Control (i.e., the VoIP and Management LAN interface), and then click Edit.

Figure 3-3: IP Settings Screen (Multiple Network Interface)

2. Configure a LAN network address that corresponds to your network IP addressing

scheme.

3. Click Apply, and then click Done to apply and validate your settings.

4. On the toolbar, from the Device Actions drop-down list, choose Reset, and then in

the

Maintenance Actions page, click the Reset button; the gateway resets and your

settings are saved to the flash memory.

Figure 3-4: Maintenance Actions: Reset Gateway

Maintain the cabled connection between the gateway’s LAN port and the computer.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 97 98

Keine Kommentare

AudioCodes MediaPack MP-124 Bedienungsanleitung Seite 17