AudioCodes Mediant 3000 Bedienungsanleitung PDF herunterladen (Seite 47)

Configuration Note 4. Configuring AudioCodes E-SBC

Connecting Microsoft Lync 2013 to a SIP Trunk 47 June 2013

4.5 Step 5: Configuring IP Groups

This step shows how to create IP Groups. An IP Group represents a SIP entity behavior in

the E-SBC's network. In the example scenario, IP Groups are created for:



Lync Server 2013 (Mediation Server) on the LAN



SIP Trunk on the WAN

These IP Groups are later used by the SBC application for routing calls.

 To configure IP Groups:

1. Open the IP Group Table page (Configuration tab > VoIP > Control Network > IP

Group Table).

2. Add an IP Group for the Lync Server 2013 Mediation Server:

a. Click Add.

b. Configure the parameters like this:

Parameter Example Setting

Index "1"

Type

Server

Description "Lync Server" (a descriptive name)

Proxy Set ID "1"

SRD "1"

Media Realm Name "MRLan"

IP Profile ID "1"

c. Click Submit.

3. Add an IP Group for the SIP Trunk:

a. Click Add.

b. Configure the parameters like this:

Parameter Example Setting

Index "2"

Type

Server

Description "SIP Trunk" (a descriptive name)

Proxy Set ID "2"

SRD "2"

Media Realm Name "MRWan"

IP Profile ID "2"

c. Click Submit.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 79 80

Keine Kommentare

AudioCodes Mediant 3000 Bedienungsanleitung Seite 47