AudioCodes Mediant 3000 Bedienungsanleitung PDF herunterladen (Seite 62)

Connecting Microsoft Lync 2013 to a SIP Trunk

AudioCodes Mediant E-SBC 62 Document #: LTRT-54004

4.10 Step 10: Configuring IP Media

This step shows how to configure the number of media channels for IP-based media. To

perform coder transcoding, define digital signaling processors (DSP) channels. The

number of media channels represents the number of DSP channels that the E-SBC

allocates to sessions.

Note: This step is required only if transcoding is required.

 To configure IP media:

1. Open the IP Media Settings page (Configuration tab > VoIP > IP Media > IP Media

Settings).

Figure 4-29: IP Media Settings

2. In the 'Number of Media Channels' field, enter the number of media channels

according to your environment's transcoding calls (e.g., 30).

3. Click Submit.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 79 80

Keine Kommentare

AudioCodes Mediant 3000 Bedienungsanleitung Seite 62