AudioCodes Mediant 3000 Bedienungsanleitung PDF herunterladen (Seite 31)

Configuration Note 4. Configuring AudioCodes E-SBC

Microsoft Lync and XO Technology SIP Trunk 31 AudioCodes Mediant E-SBC

4 Configuring AudioCodes E-SBC

This chapter provides step-by-step procedures on how to configure AudioCodes E-SBC for

interworking between Microsoft Lync Server 2013 and the XO Communications SIP Trunk.

These configuration procedures are based on the interoperability test topology described in

Section 2.4 on page 12, and includes the following main areas:



E-SBC WAN interface - XO Communications SIP Trunking environment



E-SBC LAN interface - Lync Server 2013 environment

This configuration is done using the E-SBC's embedded Web server (hereafter, referred to

as Web interface).

Notes:

• For implementing Microsoft Lync and XO Communications SIP Trunk

based on the configuration described in this section, AudioCodes E-SBC

must be installed with a Software License Key that includes the following

software features:

√ Microsoft

√ SBC

√ Security

√ DSP

√ RTP

√ SIP

For more information about the Software License Key, contact your

AudioCodes sales representative.

• The scope of this document does not cover security aspects for connecting

the SIP Trunk to the Microsoft Lync environment. Security measures should

be implemented in accordance with your organization's security policies. For

basic security guidelines, refer to the Recommended Security Guidelines

document.

• Before you begin configuring the E-SBC, ensure that the E-SBC's Web

interface Navigation tree is in Full-menu display mode. To do this, select the

Full option, as shown below:

Note that when the E-SBC is reset, the Navigation tree reverts to Basic-

menu display.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 77 78

Keine Kommentare

AudioCodes Mediant 3000 Bedienungsanleitung Seite 31