AudioCodes Mediant 3000 Bedienungsanleitung PDF herunterladen (Seite 40)

AudioCodes Mediant E-SBC 40 Document #: LTRT-40821

Microsoft Lync and XO Technology SIP Trunk

4.4 Step 4: Configure Proxy Sets

This step describes how to configure Proxy Sets. The Proxy Set defines the destination

address (IP address or FQDN) of the IP entity server. Proxy Sets can also be used to

configure load balancing between multiple servers.

For the interoperability test topology, two Proxy Sets need to be configured for the following

IP entities:



Microsoft Lync Server 2013



XO Communications SIP Trunk

These Proxy Sets will later be associated with IP Groups.

 To configure Proxy Sets:

1. Open the Proxy Sets Table page (Configuration tab > VoIP menu > Control

Network > Proxy Sets Table).

2. Configure a Proxy Set for Lync Server 2013:

Parameter Value

Proxy Set ID

Proxy Address

FE15.ilync15.local:5067

(Lync Server 2013 IP address / FQDN

and destination port)

Transport Type

TLS

Enable Proxy Keep Alive

Using Options

Proxy Load Balancing Method

Round Robin

Is Proxy Hot Swap

Yes

SRD Index

Figure 4-11: Configuring Proxy Set for Microsoft Lync Server 2013

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 77 78

Keine Kommentare

AudioCodes Mediant 3000 Bedienungsanleitung Seite 40