AudioCodes Mediant 3000 Bedienungsanleitung PDF herunterladen (Seite 34)

AudioCodes Mediant E-SBC 34 Document #: LTRT-40821

Microsoft Lync and XO Technology SIP Trunk

4. Click Apply, and then Done.

The configured IP network interfaces are shown below:

Figure 4-2: Configured Network Interfaces in IP Interfaces Table

4.1.2 Step 1b: Configure the Native VLAN ID

This step describes how to configure the Native VLAN ID for the LAN and WAN interfaces.

 To configure the Native VLAN ID for the IP network interfaces:

1. Open the Physical Ports Settings page (Configuration tab> VoIP menu > Network >

Physical Ports Table).

2. For the GROUP_1 member ports, set the 'Native Vlan' field to 1. This VLAN was

assigned to network interface "Voice".

3. For the GROUP_2 member ports, set the 'Native Vlan' field to 2. This VLAN was

assigned to network interface "WANSP".

Figure 4-3: Configured Port Native VLAN

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 77 78

Keine Kommentare

AudioCodes Mediant 3000 Bedienungsanleitung Seite 34