AudioCodes Mediant 3000 Bedienungsanleitung PDF herunterladen (Seite 49)

Configuration Note 4. Configuring AudioCodes E-SBC

Microsoft Lync and XO Technology SIP Trunk 49 AudioCodes Mediant E-SBC

4.7 Step 7: Configure Coders

This step describes how to configure coders (termed Coder Group). As Lync Server 2013

supports the G.711 coder while the network connection to XO Communications SIP Trunk

may restrict operation with a lower bandwidth coder such as G.729, you need to add a

Coder Group with the G.729 coder for the XO Communications SIP Trunk.

Note that the Coder Group ID for this entity was assigned to its corresponding IP Profile in

the previous step (see Section 4.6 on page 44).

 To configure coders:

1. Open the Coder Group Settings (Configuration tab > VoIP menu > Coders and

Profiles > Coders Group Settings).

2. Configure a Coder Group for Lync Server 2013:

Parameter Value

Coder Group ID

Coder Name

 G.711 U-law

 G.711 A-law

Silence Suppression

Enable (for both coders)

Figure 4-16: Configuring Coder Group for Lync Server 2013

3. Configure a Coder Group for XO Communications SIP Trunk:

Parameter Value

Coder Group ID

Coder Name

G.729

Figure 4-17: Configuring Coder Group for XO Communications SIP Trunk

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 77 78

Keine Kommentare

AudioCodes Mediant 3000 Bedienungsanleitung Seite 49