AudioCodes Mediant 3000 Bedienungsanleitung PDF herunterladen (Seite 57)

Configuration Note 4. Configuring AudioCodes E-SBC

Microsoft Lync and XO Technology SIP Trunk 57 AudioCodes Mediant E-SBC

4.9 Step 9: Configure SRTP

This step describes how to configure media security. If you configure the Microsoft

Mediation Server to use SRTP, you need to configure the E-SBC to operate in the same

manner. Note that SRTP was enabled for Lync Server 2013 when you configured an IP

Profile for Lync Server 2013 (see Section 4.6 on page 44).

 To configure media security:

1. Open the Media Security page (Configuration tab > Media menu > Media Security).

2. Configure the parameters as follows:

Parameter Value

Media Security

Enable

Master Key Identifier (MKI) Size

Symmetric MKI Negotiation

Enable

Figure 4-29: Configuring SRTP

3. Click Submit.

4. Reset the E-SBC with a burn to flash for your settings to take effect (see Section 4.15

on page 70).

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 77 78

Keine Kommentare

AudioCodes Mediant 3000 Bedienungsanleitung Seite 57