AudioCodes MediaPack 114 Bedienungsanleitung PDF herunterladen (Seite 269)

Version 5.6 269 November 2008

SIP User's Manual 4. ini File Configuration

Parameter Description

 Module = Module number.

For example:

[CallWaitingPerPort]

CallWaitingPerPort 0 = 0,1,1$$;

CallWaitingPerPort 1 = 1,2,1$$;

[\CallWaitingPerPort]

If enabled, when an FXS interface receives a call on a busy

endpoint, it responds with a 182 response (and not with a 486

busy). The device plays a call waiting indication signal. When

hook-flash is detected, the device switches to the waiting call. The

device that initiates the waiting call plays a Call Waiting Ringback

tone to the calling party after a 182 response is received.

Notes:

 If this parameter is not configured (default), use the global

parameter EnableCallWaiting (refer to “Supplementary

Services” on page 138).

 The numbering of channels starts at 0.

 This parameter can appear up to eight times for 8-port devices,

and up to 24 times for MP-124.

 The device's Call Progress Tones file must include a 'call

waiting Ringback' tone (caller side) and a 'call waiting' tone

(called side, FXS interfaces only).

 The EnableHold parameter must be enabled on both the

calling and the called sides.

 To define call waiting using the Web interface, refer to “Call

Waiting” on page 361.

 For a description on using ini file table parameters, refer to

“Structure of ini File Table Parameters” on page 233.

CHRRTimeout

For a description of this parameter, refer to “Supplementary

Services” on page 138.

EnableCallWaiting

For a description of this parameter, refer to ''Supplementary

Services'' on page 138.

3WayConferenceMode

Defines the mode of operation when the 3-Way Conference

feature is used.

 [0] = Conference-initiating INVITE (sent by the device), uses

the ConferenceID concatenated with a unique identifier as the

Request-UR (default).

 [1] = Conference-initiating INVITE (sent by the device), uses

only the ConferenceID as the Reques-URI.

If 3wayConferenceMode is set to 0, the Conference-initiating

INVITE sent by the device uses the ConferenceID concatenated

with a unique identifier as the Request-URI. This same Request-

URI is set as the Refer-To header value in the REFER messages

that are sent to the two remote parties.

If 3wayConferenceMode is set to 1, the Conference-initiating

INVITE sent by the device only uses the ConferenceID as the

Reques-URI. The media server sets the Contact header of the

200 OK response to the actual unique identifier (Conference URI)

to be used by the participants. This Conference URI is included

1 2 ... 264 265 266 267 268 269 270 271 272 273 274 ... 389 390

Kommentare zu diesen Handbüchern

Keine Kommentare

AudioCodes MediaPack 114 Bedienungsanleitung Seite 269

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gateways / Controller AudioCodes MediaPack 114