AudioCodes MediaPack 114 Bedienungsanleitung Seite 381
- Seite / 390
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Version 5.6 381 November 2008
SIP User's Manual 10. Selected Technical Specifications
10 Selected Technical Specifications
The main technical specifications of the MP-11x and MP-124 devices are listed in the
following subsections.
Note: All specifications in this document are subject to change without prior notice.
10.1 MP-11x Specifications
The table below lists the main technical specifications of the MP-11x.
Table 10-1: MP-11x Functional Specifications
Function Specification
Channel Capacity
Available Ports
MP-112: 2 ports*
MP-114: 4 ports
MP-118: 8 ports
* The MP-112 differs from the MP-114 and MP-118. Its
configuration excludes the RS-232 connector, the Lifeline option
and outdoor protection.
MP-11x/FXS Functionality
FXS Capabilities
Short or Long Haul (Automatic Detection): Ringer Equivalency
Number (REN) 3 per FXS port - up to 9 km (30,000 feet) using a
24-AWG line.
Note: The lines have been tested under the following
conditions: ring voltage greater than 30 Vrms; offhook loop
current greater than 20 mA (all lines ring simultaneously)
Lightning and high voltage protection for outdoor operation
Caller ID generation: Bellcore GR-30-CORE Type 1 using Bell
202 FSK modulation, ETSI Type 1, NTT, Denmark, India, Brazil,
British and DTMF ETSI CID (ETS 300-659-1)
Programmable Line Characteristics: Battery feed, line current,
hook thresholds, AC impedance matching, hybrid balance, Tx &
Rx frequency response, Tx & Rx Gains
Note: For a specific coefficient file, please contact AudioCodes.
Configurable ringing signal: up to four cadences and frequency
from 15 to 200 Hz
Loopback for testing and maintenance
MP-11x / FXO Functionality
FXO Capabilities
(Note: Applicable only to MP-
114 & MP-118)
Short or Long Haul
Lightning and high voltage protection for outdoor operation
Programmable Line Characteristics: AC impedance matching,
hybrid balance, Tx & Rx frequency response, Tx & Rx Gains,
ring detection threshold, DC characteristics
- User's Manual 1
- Table of Contents 3
- List of Figures 8
- List of Tables 11
- WEEE EU Directive 13
- Customer Support 13
- Trademarks 13
- Related Documentation 14
- 1 Overview 15
- 1.2 MediaPack Features 16
- 1.3 SIP Overview 17
- Reader’s Notes 18
- 2 Configuration Concepts 19
- 3 Web-Based Management 21
- 3.3.1 Toolbar 24
- 3.3.2 Navigation Tree 25
- 3.3.3.1 Accessing Pages 28
- 3.3.3.2 Viewing Parameters 28
- 3.3.3.5 Working with Tables 32
- 3.3.5.1 Creating a Scenario 36
- 3.3.5.3 Editing a Scenario 39
- 3.3.5.6 Deleting a Scenario 42
- 3.3.7 Getting Help 47
- 3.3.8 Using the Home Page 48
- (grey): channel inactive 49
- 3.4 Configuration Tab 52
- [0] = OAMP (default) 65
- [1] = Media 65
- [2] = Control 65
- 3.4.2 Media Settings 67
- [2] Bypass 70
- [3] Events Only 70
- 3.4.3 Security Settings 79
- [1] Enable = Enabled 116
- [0] Disable (default) 116
- [1] Enable 116
- 5 steps: 120
- To the default Proxy 121
- 3.4.4.1.4 Coders 123
- 4 steps: 130
- 3.4.4.2.3 Metering Tones 144
- 3.4.4.2.5 Keypad Features 147
- 3.4.4.6.1 Authentication 175
- 3.4.4.6.2 Automatic Dialing 176
- 3.4.4.6.4 Call Forward 178
- 3.4.4.6.6 Call Waiting 180
- Disable (default) 188
- No = Don't register 189
- Yes = Register 189
- 3.4.5 Advanced Applications 190
- [1] Enable (Bellcore) 194
- [2] Ericsson MD-110 194
- [3] NEC (ICS) 194
- 3.5 Management Tab 198
- 3.5.1.3 Maintenance Actions 207
- 2 steps: 209
- 3.5.2 Software Update 210
- 3.6.2 Gateway Statistics 223
- 3.6.2.1 Call Counters 224
- 3.6.2.2 Call Routing Status 226
- 3.6.2.3 Registration Status 227
- 3.6.2.5 IP Connectivity 228
- 4 ini File Configuration 231
- 4.2 The ini File Structure 232
- 4.3 Modifying an ini File 235
- 4.4.1 Networking Parameters 236
- 4.4.2 System Parameters 244
- [0] = Disabled (default) 251
- 4.4.4 Security Parameters 252
- 4.4.5 RADIUS Parameters 257
- 4.4.6 SNMP Parameters 258
- [1] = Enabled 268
- Port = Port number 268
- UserId = User name 272
- UserPassword = Password 272
- 4.4.8 Voice Mail Parameters 277
- 4.4.9 PSTN Parameters 279
- [66] = TBR21 280
- Npi = Number Plan 297
- Ton = Type of Number 297
- 4.4.12 Channel Parameters 298
- [0] = Disable (default) 299
- [1] = Enable 299
- [1] Enable (default) 304
- 5 Default Settings 305
- 6.4 Coefficient File 312
- 6.5 User Information File 313
- 7 IP Telephony Capabilities 315
- 7.1.1 Configuring SAS 316
- 7.3.2.1 T.38 Fax Relay Mode 319
- 7.3.3 Supporting V.34 Faxes 324
- 7.4 FXO Operating Modes 326
- 7.4.1.1 One-Stage Dialing 327
- 7.4.1.2 Two-Stage Dialing 328
- 7.4.1.4 DID Wink 329
- 7.4.2 Telephone-to-IP Calls 330
- Connectivity and QoS) 335
- 7.11 Call Detail Record 339
- 7.13 Configuration Examples 342
- 7.14.3 Call Transfer 359
- 7.14.4 Call Forward 360
- 7.14.5 Call Waiting 361
- 7.14.7 Caller ID 362
- 8 Networking Capabilities 365
- 8.2.1 STUN 366
- 8.2.3 No-Op Packets 367
- 8.3 IP Multicasting 368
- 8.8 VLANS and Multiple IPs 370
- Control: Premium control 372
- Management: Bronze 372
- 10.1 MP-11x Specifications 381
- 10.2 MP-124 Specifications 384
- 11 Glossary 387
Verwandte Produkte und Handbücher für Gateways / Controller AudioCodes MediaPack 114
(44 Seiten)
(44 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.205 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern